WENK Pneumatic 3V Solenoid Valve

The 3V Series Solenoid Valve by WENK Pneumatic is a high-performance 3-port 2-position directional control valve designed for precision control in pneumatic systems. Featuring a compact aluminum alloy body with advanced surface treatment, this valve offers exceptional durability and long service life.

Available in both normally open (NO) and normally closed (NC) configurations, it provides versatile solutions for various automation applications. The valve operates within a pressure range of 0.15~0.8 MPa with a maximum proof pressure of 1.2 MPa, ensuring reliable performance in demanding environments.

With low friction resistance, low starting pressure, and a high action frequency of up to 5 cycles per second, the 3V Series delivers precise and responsive control. Its internal guide type design ensures smooth operation and minimal maintenance requirements.

Suitable for use with 40 micron filtered air, this valve is ideal for applications in machinery manufacturing, automation systems, and industrial control processes where reliability and efficiency are paramount.

product Details

product description

Product Detail

Acting Mode	Internally/Externally Piloted
Working Media	Air
Working Pressure	0.15~0.8Mpa
Proof Pressure	1.2Mpa
Working Temperature Range	-20℃~70℃
Body Material	Aluminum Alloy

3V Series Solenoid Valve User Manual

1. Product Overview

The WENK Pneumatic 3V Series Solenoid Valve is a high-performance 3-port 2-position directional control valve designed for precision control in pneumatic systems. Featuring a compact aluminum alloy body with advanced surface treatment, this valve offers exceptional durability and long service life.

Available in both Normally Open (NO) and Normally Closed (NC) configurations, the 3V Series provides versatile solutions for various automation applications.

2. Technical Specifications

2.1 Basic Parameters

Series: 3V

Type: 3-port 2-position solenoid valve

Working Medium: Compressed air filtered through 40μm filter

Action Mode: Internal pilot type

Lubrication: Not required

Working Pressure Range: 0.15~0.8 MPa

Maximum Proof Pressure: 1.2 MPa

Operating Temperature Range: -20~70°C

Maximum Action Frequency: 5 cycles/second

Minimum Excitation Time: 0.05 seconds or less

3. Installation Steps

Pre-installation Preparation

Confirm that the power supply voltage matches the solenoid valve rated voltage

Verify that the air supply pressure is within the range of 0.15~0.8 MPa

Ensure the air supply has been filtered through a 40μm filter

Check that the valve model matches the installation requirements

Installation Location Selection

Choose a well-ventilated location away from direct sunlight

Ensure there is sufficient space around the valve for operation and maintenance

Avoid installing on equipment with severe vibration

Avoid installation in corrosive environments unless special protective measures are taken

Piping Connection

Confirm that the pipes are clean and free of impurities and moisture

Connect the air inlet (P), air outlet (A), and exhaust port (R) according to the markings on the valve body

Use appropriate sealing material (such as PTFE tape) to ensure a tight connection

Be careful not to over-tighten the pipes to avoid damaging the valve body

Electrical Connection

Ensure the power supply is turned off

Connect the power cord according to the wiring diagram

For polarized DC solenoid valves, pay attention to correct positive and negative polarity connection

Ensure secure electrical connections to avoid loosening

Fixed Installation

Use suitable bolts to fix the valve to the mounting surface

Ensure the valve is securely installed without looseness

4. Operation Guide

Initial Start-up

Slowly open the air supply and observe if the valve operates normally

Turn on the power and check if the valve switching is normal

Check for leaks at all connections

Confirm that the valve action direction meets requirements

Normal Operation

Control the valve switching through control signals

Regularly check if the valve operates smoothly and accurately

Monitor the pressure gauge to ensure working pressure is within the specified range

Pay attention to the coil temperature; if abnormal high temperature is detected, stop use immediately

Emergency Stop

In case of emergency, cut off the power supply and air supply

If abnormal sounds or leaks are detected, stop use immediately and inspect

5. Maintenance

Daily Inspection

Check for leaks at all connections

Observe if the valve operates smoothly without abnormal noise

Check if the air supply pressure is within the specified range

Check if the coil temperature is normal

Regular Maintenance

Every 3 months:

Clean the exterior of the valve to remove dust and dirt

Check if the pipe connections are secure

Check if the electrical connections are secure

Every 6 months:

Inspect the condition of seals and replace them if aging or damage is found

Clean the interior of the valve body to remove possible impurities

Annually:

Perform comprehensive performance testing

Replace aging components such as springs and seals

Long-term Storage

If not used for a long period, clean the interior and exterior of the valve

Apply anti-rust agent to protect metal components

Store in a dry, well-ventilated environment

Regularly check the storage condition to prevent moisture and corrosion

6. Precautions

Do not use the valve exceeding the maximum proof pressure

Avoid installing the valve in corrosive environments unless special protective measures are taken

Do not use the valve with media other than compressed air unless specifically stated

Before performing maintenance, always cut off the power supply and shut off the air supply

Regularly check the working status of the valve to detect and resolve issues promptly

If any abnormal conditions are found, stop use immediately and inspect

When replacing parts, use genuine WENK Pneumatic accessories to ensure product performance and safety

Our Commitments & Core Advantages

1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.

2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.

3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.

We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.