Products
0102030405
WENK Pneumatic 3V2/3V3 Series Solenoid Valve
Product Detail
Acting Mode |
Double Acting |
Working Media |
Cleaned Air |
Working Pressure |
0~0.8Mpa |
Proof Pressure |
1.2Mpa |
Working Temperature Range |
-20℃~70℃ |
Lubrication Required |
Lubrication-Free |
Body Material |
Aluminum Alloy |
3V2/3V3 Solenoid Valve User Guide
1. Product Introduction
The 3V2/3V3 Solenoid Valve is a high-performance electromagnetic control component developed by WENK Pneumatic, designed specifically for automated air flow control in industrial systems. Featuring a robust metal body and a black solenoid coil, this product ensures reliable performance in various industrial environments. Available in multiple configurations, it is suitable for pneumatic circuits requiring remote or automated operation, widely used in manufacturing, automation, and machinery fields, providing an ideal solution for applications requiring precise automated control.
Main features:
- Robust metal body design
- Reliable black solenoid coil
- Efficient on/off directional flow control
- Suitable for various industrial pneumatic systems
- Easy to install and maintain
2. Installation Instructions
2.1 Pre-installation Preparation
- Ensure the installation environment meets the product working conditions
- Check that the product packaging is intact and undamaged
- Prepare necessary installation tools and accessories
- Confirm that the power supply voltage matches the solenoid valve rated voltage
- Confirm the air flow direction, the valve body is marked with corresponding port identifiers
2.2 Installation Steps
- Shut off the air supply and power supply to ensure safety during installation
- Install the valve body in the pneumatic circuit according to the air flow direction
- Use appropriate tools to connect the input port to the air source
- Connect the output port to the equipment requiring control
- Use sealing tape or sealant to ensure tight connections and prevent air leakage
- Connect the power supply line, paying attention to polarity (if applicable)
- Check all connections for firmness
2.3 Installation Notes
- Avoid strong impact to the valve body during installation
- Ensure correct port connections, avoid incorrect installation
- Power connections must comply with electrical safety standards
- Installation environment should avoid high temperature, humidity, and corrosive gases
- Regularly check the tightness of installation connections
3. Usage Methods
3.1 Pre-operation Check
- Confirm that the air source pressure is within the product's allowable range
- Confirm that the power supply voltage matches the solenoid valve rated voltage
- Check that all connections are firm and free from air leakage
- Test the working status of the solenoid valve
3.2 Basic Operation
- Turn on the power, the solenoid coil is energized, the valve opens, allowing air to pass through
- Turn off the power, the solenoid coil is de-energized, the valve closes, stopping air flow
- Control the air flow by controlling the on/off of the power supply according to system requirements
3.3 Operation Notes
- Avoid frequent switching of the solenoid valve, which may shorten service life
- Ensure stable power supply voltage, avoid voltage fluctuations
- If abnormal sounds or overheating are found, stop using immediately and inspect
- When not in use for a long time, it is recommended to turn off the air supply and power supply
4. Maintenance
4.1 Daily Maintenance
- Regularly clean the valve body surface to remove dust and oil
- Check if the temperature of the solenoid coil is normal
- Test the on/off performance of the solenoid valve
4.2 Regular Inspection
- Check the sealing status of connection ports monthly
- Inspect the insulation performance of the solenoid coil quarterly
- Check the wear condition of internal seals every six months
- Perform a comprehensive cleaning and maintenance annually
4.3 Maintenance Notes
- Use neutral detergent for cleaning, avoid using corrosive solvents
- Ensure the air supply and power supply are turned off during maintenance to avoid accidental activation
- If parts need to be replaced, it is recommended to use original accessories
- When the solenoid coil is damaged, it should be replaced as a whole, avoid self-repair
5. Troubleshooting
-
Solenoid valve does not operate
- Power not connected: Check power connection
- Coil damaged: Replace solenoid coil
- Internal jamming: Clean internal parts
-
Solenoid valve cannot close
- Seal damage: Replace seals
- Foreign matter jamming: Clean internal flow passages
- Coil not fully de-energized: Check control circuit
-
Air leakage
- Loose connections: Reconnect and reinforce
- Seal wear: Replace seals
- Valve body damage: Contact supplier for repair or replacement
-
Coil overheating
- Abnormal power supply voltage: Check and adjust power supply voltage
- Coil aging: Replace solenoid coil
- Ambient temperature too high: Improve installation environment
Solenoid valve does not operate
- Power not connected: Check power connection
- Coil damaged: Replace solenoid coil
- Internal jamming: Clean internal parts
Solenoid valve cannot close
- Seal damage: Replace seals
- Foreign matter jamming: Clean internal flow passages
- Coil not fully de-energized: Check control circuit
Air leakage
- Loose connections: Reconnect and reinforce
- Seal wear: Replace seals
- Valve body damage: Contact supplier for repair or replacement
Coil overheating
- Abnormal power supply voltage: Check and adjust power supply voltage
- Coil aging: Replace solenoid coil
- Ambient temperature too high: Improve installation environment
Our Commitments & Core Advantages
1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.
2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.
3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.
We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.