Products

Products Categories

WENK Pneumatic ADN/ACE Compact Cylinder

The ADN/ACE series compact cylinder is a high-performance pneumatic actuator designed in compliance with ISO 21287 standards, offering exceptional space efficiency with a 50% smaller footprint compared to conventional ISO 15552 cylinders. This double-acting cylinder delivers reliable linear motion in both extend and retract directions, making it ideal for automated machinery, production lines, and precision equipment where space is at a premium.

Available in bore sizes ranging from 10mm to 125mm and strokes up to 500mm, the ADN/ACE cylinder features an anodized aluminum barrel and high-alloy steel piston rod for durability and corrosion resistance. Integrated elastic cushioning rings ensure smooth operation and reduced noise, while proximity switch compatibility allows for precise position detection.

Engineered for efficiency, this compact cylinder operates at pressures between 0.1MPa and 1.0MPa, with a wide temperature range of -20°C to 120°C. Suitable for various industrial applications including manufacturing, packaging, and material handling, the ADN/ACE compact cylinder delivers consistent performance in a streamlined design.

product Details

product description

Product Detail

Acting Mode	Double Acting
Working Media	Cleaned Air
Working Pressure	0.15~1.0Mpa
Working Temperature Range	-20℃~70℃
Piston Speed	30~500mm/s
Body Material	Aluminum Alloy

ADN/ACE Compact Cylinder User Manual

1. Product Introduction

The ADN/ACE series compact cylinder is an ISO 21287 compliant pneumatic actuator designed specifically for automated applications with limited space. Featuring a double-acting design, it can output force in both directions, making it suitable for various industrial automation scenarios.

Product Features

ISO 21287 compliant, compact structure saving installation space
Double-acting design with bidirectional force output
Anodized aluminum cylinder barrel with strong corrosion resistance
High-alloy steel piston rod with high surface hardness and wear resistance
Built-in elastic cushioning rings for smooth operation and low noise
Proximity switch mountable for precise position detection
Multiple variants available to meet personalized application requirements

2. Technical Parameters

Basic Parameters

Action type: Double-acting
Operating medium: Filtered compressed air (according to ISO 8573-1:2010 (7:4:4))
Operating pressure range: 0.1-1.0MPa
Pressure resistance: 1.5MPa
Ambient and fluid temperature: -20~120°C (non-freezing)
Speed range: 30~500mm/s

Specifications

Bore size: 10, 12, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125mm
Stroke: 1~500mm
Connection size: M5, G1/8", G1/4"
Piston rod thread: Internal or external thread

3. Installation Steps

Pre-installation Preparation

Confirm that the cylinder model matches the installation environment
Check if the cylinder appearance is intact and undamaged
Prepare necessary installation tools and accessories
Ensure the installation surface is flat and clean

Installation Process

Select appropriate mounting accessories based on the installation method
Fix the cylinder in the installation position, ensuring the piston rod is aligned with the load movement direction
Connect the air supply pipeline, paying attention to the direction of the inlet and exhaust ports
Install the magnetic switch (if any) and adjust to the appropriate position
Check that all connections are secure and without looseness

Installation Precautions

Avoid radial load on the piston rod
Ensure coaxiality between the cylinder and the load during installation
Reserve sufficient buffer space to avoid collision
Ensure correct pipeline connection without leakage

4. Operation Guide

Pre-operation Check

Confirm that the air supply pressure is within the specified range
Check that all connections are secure
Ensure the working environment is clean with no impurities entering the cylinder

Operation Procedure

Slowly open the air supply valve to make the cylinder move slowly
Observe if the cylinder operates smoothly without abnormal noise
Test the working status of the magnetic switch (if any)
Adjust the working pressure and flow as needed

Operation Precautions

Avoid using beyond the rated pressure
Avoid long-term high-speed operation of the cylinder without lubrication
Do not strike the cylinder body and piston rod
Regularly check the cylinder operation status and stop for inspection if abnormalities are found

5. Maintenance

Daily Maintenance

Keep the cylinder exterior clean
Check if the air supply pressure is stable
Check for leaks at connection points
Listen to the operating sound to determine if it is normal

Regular Maintenance

Weekly inspection:
- Cylinder operation status
- Fastening condition of connection parts
- Magnetic switch working status
Monthly inspection:
- Piston rod surface condition
- Buffering effect
- Seal condition
Quarterly inspection:
- Internal condition of the cylinder
- Replace worn seals
- Comprehensive cylinder cleaning

Maintenance Precautions

Use recommended lubricants
Avoid using corrosive cleaning agents
Ensure the air supply is turned off during maintenance
Pay attention to model matching when replacing seals

6. Troubleshooting

Cylinder does not operate
- Possible causes:
  - Insufficient air supply pressure
  - Solenoid valve failure
  - Airway blockage
  - Damaged seals
- Solutions:
  - Check air supply pressure and adjust to the specified range
  - Check solenoid valve working status, replace if necessary
  - Clean the airway to ensure smooth flow
  - Inspect seals and replace if necessary
Cylinder moves slowly or weakly
- Possible causes:
  - Insufficient air supply pressure
  - Insufficient flow
  - Worn piston or piston rod seals
  - Worn cylinder barrel inner wall
- Solutions:
  - Increase air supply pressure
  - Increase pipe diameter or reduce pipe length
  - Replace seals
  - Inspect cylinder barrel inner wall, replace cylinder if necessary
Cylinder operates unsteadily or with abnormal noise
- Possible causes:
  - Improper adjustment of buffer device
  - Insufficient lubrication
  - Piston rod and cylinder barrel are not coaxial
  - Impurities inside the cylinder barrel
- Solutions:
  - Adjust the buffer device
  - Increase lubrication
  - Reinstall and adjust coaxiality
  - Clean the cylinder interior
Air leakage
- Possible causes:
  - Worn or damaged seals
  - Loose connection parts
  - Damaged cylinder barrel or piston rod
- Solutions:
  - Replace seals
  - Tighten connection parts
  - Inspect cylinder barrel and piston rod, replace if necessary
Magnetic switch does not work
- Possible causes:
  - Improper switch installation position
  - Switch failure
  - Insufficient magnet strength
- Solutions:
  - Adjust switch position
  - Check switch circuit, replace if necessary
  - Contact supplier to check magnet strength

Our Commitments & Core Advantages

1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.

2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.

3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.

We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.

Make an free consultant

Your Name*

E-mail*

Phone Number

Country

Remarks*

reset