Products
0102030405
WENK Pneumatic BD Series Block
Specification
| Model | R | A | H |
|---|---|---|---|
| BD-01 | PT1/8 | 7.5 | 5 |
| BD-02 | PT1/4 | 9 | 6 |
| BD-03 | PT3/8 | 11.5 | 8 |
| BD-04 | PT1/2 | 15 | 10 |
| BD-06 | PT3/4 | 16.5 | 14 |
| BD-10 | PT1 | 18.3 | 14 |
BD Series Block User Guide
Product Introduction
The BD Series Block is a precision-engineered pipe fitting designed by WENK Pneumatic for sealing the ends of threaded pipes in pneumatic systems. Constructed from high-quality brass, it features an external thread structure and a hexagonal head for easy installation and removal using standard tools.
This series offers a variety of specifications, including PT1/8, PT1/4, PT3/8, PT1/2, PT3/4, PT1, and G1 thread sizes, to meet the requirements of different piping systems.
Installation Preparation
-
Tool Preparation
- Appropriately sized wrench or pipe pliers
- Cleaning cloth
- Sealing material (such as PTFE tape, optional)
-
Inspection Items
- Confirm that the block size matches the pipe thread
- Check that the block threads are intact and undamaged
- Ensure the pipe end is clean, free of impurities or damage
Tool Preparation
- Appropriately sized wrench or pipe pliers
- Cleaning cloth
- Sealing material (such as PTFE tape, optional)
Inspection Items
- Confirm that the block size matches the pipe thread
- Check that the block threads are intact and undamaged
- Ensure the pipe end is clean, free of impurities or damage
Installation Steps
-
Clean the Pipe End
- Wipe the pipe threads with a clean cloth to remove dust, oil, and impurities
- Check for any damage or deformation on the pipe threads
-
Sealing Treatment (Optional)
- For high-pressure or gas applications, it is recommended to wrap an appropriate amount of PTFE tape around the block threads
- Start wrapping from the beginning of the thread, applying 2-3 even wraps along the thread direction
- Avoid getting PTFE tape inside the pipe
-
Install the Block
- Gently hand-thread the block into the pipe threads to ensure proper engagement
- Use a wrench or pipe pliers to tighten the block until a proper seal is achieved
- Be careful not to over-tighten, as this may damage the threads or the block
-
Check the Seal
- After installation, perform a pressure test to ensure a proper seal
- Inspect the connection for any signs of leakage
Clean the Pipe End
- Wipe the pipe threads with a clean cloth to remove dust, oil, and impurities
- Check for any damage or deformation on the pipe threads
Sealing Treatment (Optional)
- For high-pressure or gas applications, it is recommended to wrap an appropriate amount of PTFE tape around the block threads
- Start wrapping from the beginning of the thread, applying 2-3 even wraps along the thread direction
- Avoid getting PTFE tape inside the pipe
Install the Block
- Gently hand-thread the block into the pipe threads to ensure proper engagement
- Use a wrench or pipe pliers to tighten the block until a proper seal is achieved
- Be careful not to over-tighten, as this may damage the threads or the block
Check the Seal
- After installation, perform a pressure test to ensure a proper seal
- Inspect the connection for any signs of leakage
Maintenance
-
Regular Inspection
- Periodically check the block for looseness or leakage
- Inspect the threaded connection for corrosion or damage
-
Cleaning and Maintenance
- Keep the block surface clean to prevent dust and debris accumulation
- For blocks used long-term, it is recommended to periodically remove, clean, and reinstall them
-
Replacement Cycle
- Replace the block regularly based on usage environment and frequency
- Shorten the replacement cycle in corrosive environments or under high-frequency usage conditions
Regular Inspection
- Periodically check the block for looseness or leakage
- Inspect the threaded connection for corrosion or damage
Cleaning and Maintenance
- Keep the block surface clean to prevent dust and debris accumulation
- For blocks used long-term, it is recommended to periodically remove, clean, and reinstall them
Replacement Cycle
- Replace the block regularly based on usage environment and frequency
- Shorten the replacement cycle in corrosive environments or under high-frequency usage conditions
Precautions
- Use appropriate tools during installation to avoid damage from excessive force
- Ensure the correct size block is selected; mismatched sizes may cause leakage or damage
- Do not disassemble or adjust the block while the system is under pressure
- Avoid using in environments exceeding the product's rated pressure and temperature
- Regular inspection and maintenance can extend product life and ensure safe system operation
Our Commitments & Core Advantages
1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.
2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.
3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.
We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.