Products
0102030405
WENK Pneumatic BW Brass Double Male Straight
Product Detail
Working Media |
Cleaned Air |
Working Pressure |
0.1~1Mpa |
Proof Pressure |
1Mpa |
Working Temperature Range |
0℃~80℃ |
Body Material |
Brass |
BW Brass Double Male Straight Fitting - User Guide
1. Product Introduction
The BW Brass Double Male Straight Fitting (BW-02) is a high-quality brass pipe connector manufactured by WENK Pneumatic. Designed with male threads on both ends, it is used to connect two internally threaded pipes or equipment.
Product Features
- Premium brass material with excellent corrosion resistance and oxidation resistance
- Precision machined external threads on both ends ensure tight and reliable connections
- High temperature and pressure resistance, operating temperature range 0-80°C, working pressure up to 1.0MPa
- Suitable for various fluid media such as compressed air and water
Application Scenarios
- Pneumatic system pipe connection and extension
- Plumbing system pipe connection
- Industrial fluid transfer systems
- Mechanical equipment pipe connections
2. Installation Guide
Pre-Installation Preparation
- Confirm the required specification size (1/8", 1/4", 3/8", 1/2", etc.)
- Prepare installation tools: pipe wrench, PTFE tape or thread sealant
- Check that the pipe and fitting threads are intact, without damage or burrs
Installation Steps
- Cleaning: Use a clean cloth to clean the threaded parts of the pipe and fitting to ensure no impurities
- Sealing: Wrap PTFE tape around the external threads of the fitting (clockwise direction), usually 3-5 turns
- Pre-installation: Hand-screw the fitting into the internal thread of the first pipe or equipment
- Tightening: Use a pipe wrench to tighten moderately, being careful not to use excessive force to avoid damaging the threads
- Connect the other end: Connect the other end pipe or equipment using the same method
- Inspection: After installation, perform a pressure test to confirm no leakage
Installation Notes
- Avoid using excessive torque during installation, it is recommended to use a torque wrench to control the force
- Ensure correct thread matching, avoid forced installation of threads with different specifications
- For high-temperature environments, it is recommended to use high-temperature resistant sealing materials
- Protect the threads during installation to avoid collision or scratches
3. Usage Method
Operating Specifications
- Before starting the system, confirm that all connection points are correctly installed and tightened
- Gradually increase system pressure, avoid sudden pressurization
- Regularly check the system operating status, observe for leaks or abnormal vibration
- Follow the pressure and temperature limits designed for the system, do not exceed the rated parameters of the product
Usage Recommendations
- In environments where vibration may occur, it is recommended to use anti-loosening measures
- For important systems, it is recommended to install pressure monitoring devices
- Choose appropriate sealing materials based on the characteristics of the medium used
- Before restarting the system after long-term shutdown, a comprehensive inspection should be carried out
4. Maintenance
Daily Maintenance
- Regularly check whether the fitting surface has corrosion, oxidation or damage
- Check whether there are signs of leakage at the connection points (such as water droplets, condensation or dust accumulation)
- Keep the fitting and surrounding environment clean, avoid dust and impurity accumulation
- For fittings long-term exposed to harsh environments, it is recommended to increase the inspection frequency
Maintenance Cycle
- General environment: Check every 3-6 months
- Harsh environment (high temperature, humidity, corrosive medium): Check every 1-3 months
- Important systems: Develop more frequent inspection plans according to system requirements
Maintenance Measures
- Slight corrosion can be treated with brass cleaner
- If there is leakage, re-wrap with PTFE tape or replace the sealing material
- When the thread is severely damaged, the fitting should be replaced with a new one in time
- Regularly lubricate and maintain the threaded part to extend service life
5. Troubleshooting
Common Problems and Solutions
Problem: Leakage at the fitting joint
- Cause: Aging of sealing material or improper installation
- Solution: Re-wrap with PTFE tape or replace with sealant, ensure correct installation
Problem: Thread cannot be screwed in normally
- Cause: Thread specifications do not match or there is damage
- Solution: Confirm specification matching, check if the thread is intact, replace the fitting if necessary
Problem: Severe corrosion on the fitting surface
- Cause: Strong corrosive environment or too long service time
- Solution: Replace with a new fitting, consider using anti-corrosion coating or choose more corrosion-resistant materials
Problem: System pressure drop
- Cause: Poor sealing of the fitting or micro-leakage
- Solution: Check all connection points, re-tighten or replace sealing materials
Emergency Treatment
- When severe leakage is found, immediately shut down the system and release pressure
- Use temporary sealing measures to control leakage if necessary
- Important systems should have emergency treatment plans
- For problems that cannot be solved by yourself, contact professional technical personnel for treatment
Our Commitments & Core Advantages
1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.
2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.
3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.
We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.
