Products
0102030405
WENK Pneumatic KtL Series Copper Locknut Elbow Fittings
Product Detail
Working Media |
Cleaned Air |
Working Pressure |
0.1~1Mpa |
Proof Pressure |
1Mpa |
Working Temperature Range |
0℃~80℃ |
Body Material |
Brass |
KtL Series Copper Locknut Elbow Fitting User Guide
Product Introduction
The KtL Series Copper Locknut Elbow Fitting is a high-quality 90-degree pneumatic connection component manufactured by WENK Pneumatic. Made from premium H59 brass with nickel plating, it offers excellent corrosion resistance and long service life. This fitting is designed for 90-degree directional connections in compressed air systems and is compatible with various hoses including PA, PU, and PE.
Installation Steps
-
Preparation
- Ensure the working environment is clean, free from dust and impurities
- Check that the fitting and hose are intact and undamaged
- Prepare necessary tools: wrench, pipe cutter
-
Hose Preparation
- Cut the hose to the required length using a pipe cutter, ensuring a clean cut
- Remove any burrs or debris from the inside of the hose
- If the hose is stiff, moderately heat the end to facilitate insertion
-
Fitting Installation
- Unscrew the locknut and slide it onto the hose
- Fully insert the hose into the fitting body, ensuring it is properly seated
- Tighten the locknut using a wrench (do not over-tighten)
- Check that the connection is secure and the hose is not loose
-
System Connection
- Connect the threaded end of the fitting to the corresponding component in the pneumatic system
- Use appropriate sealing material (such as PTFE tape) to ensure a tight threaded connection
- Tighten the threaded connection moderately to avoid thread damage from excessive force
Preparation
- Ensure the working environment is clean, free from dust and impurities
- Check that the fitting and hose are intact and undamaged
- Prepare necessary tools: wrench, pipe cutter
Hose Preparation
- Cut the hose to the required length using a pipe cutter, ensuring a clean cut
- Remove any burrs or debris from the inside of the hose
- If the hose is stiff, moderately heat the end to facilitate insertion
Fitting Installation
- Unscrew the locknut and slide it onto the hose
- Fully insert the hose into the fitting body, ensuring it is properly seated
- Tighten the locknut using a wrench (do not over-tighten)
- Check that the connection is secure and the hose is not loose
System Connection
- Connect the threaded end of the fitting to the corresponding component in the pneumatic system
- Use appropriate sealing material (such as PTFE tape) to ensure a tight threaded connection
- Tighten the threaded connection moderately to avoid thread damage from excessive force
Usage Instructions
-
Working Medium: Suitable for non-corrosive media such as compressed air, water, and oil
-
Working Pressure: Use within the specified working pressure range
-
Working Temperature: The operating environment temperature should be between 0~80°C
-
Flow Control: Select the appropriate fitting size according to system requirements to ensure adequate flow
-
Regular Inspection: Periodically check connections for tightness and signs of leakage during use
Maintenance
-
Daily Inspection: Regularly check the fitting surface for corrosion, cracks, or other damage
-
Cleaning Maintenance: Keep the fitting surface clean to prevent dust and impurity accumulation
-
Seal Inspection: Check if seals are aged or damaged, replace if necessary
-
Storage Requirements: Unused fittings should be stored in a dry, ventilated environment, avoiding direct sunlight and high temperatures
Troubleshooting
-
Leakage Issues
- Check if the locknut is properly tightened
- Verify if the hose is fully inserted
- Inspect the threaded connection for proper sealing
- Replace damaged seals
-
Loose Connections
- Retighten the locknut
- Check if the hose is worn, replace if necessary
- Ensure the hose size matches the fitting
-
Insufficient Flow
- Check if the fitting is clogged with impurities
- Confirm if the fitting size meets system flow requirements
- Verify if the system pressure is normal
Leakage Issues
- Check if the locknut is properly tightened
- Verify if the hose is fully inserted
- Inspect the threaded connection for proper sealing
- Replace damaged seals
Loose Connections
- Retighten the locknut
- Check if the hose is worn, replace if necessary
- Ensure the hose size matches the fitting
Insufficient Flow
- Check if the fitting is clogged with impurities
- Confirm if the fitting size meets system flow requirements
- Verify if the system pressure is normal
Our Commitments & Core Advantages
1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.
2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.
3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.
We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.