Products
0102030405
WENK Pneumatic M3 Mechanical Valve
Product Detail
Acting Mode |
External Control Direct Operated |
Working Media |
Cleaned Air |
Working Pressure |
0~1.0Mpa |
Proof Pressure |
1.5Mpa |
Working Temperature Range |
-5℃~60℃ |
Body Material |
Aluminum Alloy |
M3 Series Mechanical Valve User Manual
Product Overview
The M3 Series Mechanical Valves by WENK Pneumatic are high-quality 3-port, 2-position pneumatic control components designed for various industrial automation systems. This series of valves adopts advanced sliding column structure and high-quality aluminum alloy materials to ensure long-term stable operation and reliable performance.
The M3 Series Mechanical Valves feature:
- Exhaust ports located on the body for easy muffler installation, reducing noise and pollution
- Sliding column structure with control force unaffected by working pressure, inner ring seal for excellent sealing performance and flexible commutation
- No lubrication required, easy maintenance
- Multiple control head options to suit different operational needs
- Multi-position installation, convenient to use
- Metal control heads for long service life and high reliability
Installation Steps
-
Pre-installation Preparation
- Verify that the valve model matches system requirements
- Inspect the valve for damage or contamination
- Prepare necessary installation tools and sealing materials
-
Installation Methods
- Body mounting: Secure the valve body directly to the mounting plate using screws
- Panel mounting: Fix the valve to the control panel through panel mounting holes
-
Piping Connection
- Ensure pipes are clean and free of contaminants and moisture
- Use appropriate sealing material (such as PTFE tape) on threads
- Connect inlet pipe (P), outlet pipe (A), and exhaust pipe (R) according to the markings on the valve body
- Avoid over-tightening to prevent thread damage
-
Installation Precautions
- Install the valve in a location convenient for operation and maintenance
- Avoid installation near heat sources or vibration sources
- Ensure the valve's operating direction meets system design requirements
- The control part is made of engineering plastic and should only be operated manually; metal impact is prohibited
Pre-installation Preparation
- Verify that the valve model matches system requirements
- Inspect the valve for damage or contamination
- Prepare necessary installation tools and sealing materials
Installation Methods
- Body mounting: Secure the valve body directly to the mounting plate using screws
- Panel mounting: Fix the valve to the control panel through panel mounting holes
Piping Connection
- Ensure pipes are clean and free of contaminants and moisture
- Use appropriate sealing material (such as PTFE tape) on threads
- Connect inlet pipe (P), outlet pipe (A), and exhaust pipe (R) according to the markings on the valve body
- Avoid over-tightening to prevent thread damage
Installation Precautions
- Install the valve in a location convenient for operation and maintenance
- Avoid installation near heat sources or vibration sources
- Ensure the valve's operating direction meets system design requirements
- The control part is made of engineering plastic and should only be operated manually; metal impact is prohibited
Operation Guide
-
Lever Type (M3R/M3L)
- External force required for commutation is provided by external mechanical devices
- Suitable for position detection or limit switches
- M3L one-way roller valve is only effective in one direction; pay attention to installation direction
-
Button Type (M3PF/M3PP/M3PM)
- Manual operation: press the button to switch, automatically resets when released
- Mushroom head button (M3PM) provides a larger operating area, suitable for emergency stop applications
- Flat button (M3PF) and raised button (M3PP) are suitable for general control
-
Knob Type (M3HS/M3PL)
- M3HS selection type: rotate the knob to switch between different working states
- M3PL detent type: after pressing to position, the knob must be rotated to reset
-
Long Handle Type (M3C/M3D/M3Y)
- Long handle design facilitates remote operation or use in confined spaces
- M3Y rocker type provides a larger operating arm
-
Operation Precautions
- Avoid using excessive force during operation to prevent valve damage
- Regularly check if the operating mechanism is flexible and free of jamming
- Pay attention to the commutation stroke and do not exceed the specified range, as this may cause valve body damage
Lever Type (M3R/M3L)
- External force required for commutation is provided by external mechanical devices
- Suitable for position detection or limit switches
- M3L one-way roller valve is only effective in one direction; pay attention to installation direction
Button Type (M3PF/M3PP/M3PM)
- Manual operation: press the button to switch, automatically resets when released
- Mushroom head button (M3PM) provides a larger operating area, suitable for emergency stop applications
- Flat button (M3PF) and raised button (M3PP) are suitable for general control
Knob Type (M3HS/M3PL)
- M3HS selection type: rotate the knob to switch between different working states
- M3PL detent type: after pressing to position, the knob must be rotated to reset
Long Handle Type (M3C/M3D/M3Y)
- Long handle design facilitates remote operation or use in confined spaces
- M3Y rocker type provides a larger operating arm
Operation Precautions
- Avoid using excessive force during operation to prevent valve damage
- Regularly check if the operating mechanism is flexible and free of jamming
- Pay attention to the commutation stroke and do not exceed the specified range, as this may cause valve body damage
Maintenance
-
Daily Inspection
- Check for air leakage
- Inspect if the operating mechanism is flexible
- Verify that connecting pipes are secure
-
Regular Maintenance
- Every 3 months: Clean the external surface of the valve and check connection tightness
- Every 6 months: Inspect the condition of seals and replace if necessary
- Annually: Conduct a comprehensive inspection, including disassembly to check internal components
-
Maintenance Precautions
- Always cut off the air supply and release system pressure before maintenance
- Avoid using corrosive cleaning agents
- Pay attention to the correct installation position of parts when reassembling after maintenance
- If lubrication is used, it should not be interrupted; ISO VG32 or equivalent oil is recommended
Daily Inspection
- Check for air leakage
- Inspect if the operating mechanism is flexible
- Verify that connecting pipes are secure
Regular Maintenance
- Every 3 months: Clean the external surface of the valve and check connection tightness
- Every 6 months: Inspect the condition of seals and replace if necessary
- Annually: Conduct a comprehensive inspection, including disassembly to check internal components
Maintenance Precautions
- Always cut off the air supply and release system pressure before maintenance
- Avoid using corrosive cleaning agents
- Pay attention to the correct installation position of parts when reassembling after maintenance
- If lubrication is used, it should not be interrupted; ISO VG32 or equivalent oil is recommended
Safety Precautions
- Ensure the system is depressurized before installation and maintenance
- Avoid inserting fingers or other body parts into the valve's moving range during operation
- Regularly check the valve status and stop use immediately if abnormalities are found
- Do not exceed the valve's rated working pressure and temperature range
- Do not strike valve operating components with sharp tools
- If abnormal noise or vibration is detected, inspect immediately
Our Commitments & Core Advantages
1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.
2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.
3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.
We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.