Products
0102030405
WENK Pneumatic MHL2 Series Wide Type Parallel Gripper
Product Detail
| Bore Size | 10 | 16 | 20 | 25 | 32 | 40 |
| Effective Clamping Force | 19N | 45N | 74N | 131N | 228N | 396N |
| Operating Pressure | 0.15~0.6Mpa | 0.1~0.6Mpa | ||||
| Actuation Method | Double-Acting | |||||
| Media Temperature | -10℃~60℃ | |||||
| Repeatability | ±0.1mm | |||||
| Material | Aluminum Alloy | |||||
MHL2 Wide Pneumatic Finger User Guide
Product Overview
The MHL2 series wide pneumatic finger is a parallel opening/closing pneumatic clamping device introduced by a Corporation. Specifically designed for applications requiring wide-stroke gripping of various sized workpieces, this series features a double piston structure and rack-and-pinion mechanism, achieving the perfect combination of compact design and large gripping force. It is suitable for various industrial automation scenarios.
Product Specifications
- Bore sizes: 10mm, 16mm, 20mm, 25mm, 32mm, 40mm
- Action type: Double acting
- Operating fluid: Compressed air
- Operating pressure range:
- 10mm bore: 0.15~0.6MPa
- Other bores: 0.1~0.6MPa
- Ambient and fluid temperature: -10~60°C
- Repeatability: ±0.1mm
- Maximum operating frequency:
- 10mm, 16mm, 20mm, 25mm bores: 60 cycles per minute
- 32mm, 40mm bores: 30 cycles per minute
- Gripping force (at 0.5MPa):
- 10mm bore: 14N
- 16mm bore: 45N
- 20mm bore: 74N
- 25mm bore: 131N
- 32mm bore: 228N
- 40mm bore: 396N
- Opening/closing stroke range: 20~200mm
Installation Steps
-
Confirm installation location and space requirements
- Ensure mounting surface is flat and sufficiently strong
- Reserve appropriate space for piping and wiring
-
Secure the gripper body
- Use suitable screws to fix the gripper to the mounting surface
- Select appropriate mounting screw specifications based on different bore sizes
- Ensure secure installation to avoid precision issues due to looseness
-
Install fingers and accessories
- Install appropriate fingers or fixtures according to application requirements
- Fix fingers using finger mounting threaded holes
- Ensure fingers are installed parallel and symmetrically
-
Piping connection
- Confirm the opening and closing direction of the gripper
- Connect to air ports using suitable air tubes and fittings
- Ensure piping is properly sealed without leaks
-
Magnetic switch installation (optional)
- Install magnetic switches if position detection is required
- Adjust switch position to accurately detect finger position
Operation Guide
-
Pre-start checks
- Confirm air supply pressure is within specified range
- Check piping connections for correctness
- Ensure operating environment temperature is within allowable range
-
Basic operation
- Control the opening and closing of fingers by controlling the supply and exhaust of compressed air
- Finger opening: Compressed air enters from the "open port"
- Finger closing: Compressed air enters from the "close port"
-
Gripping force adjustment
- Adjust gripping force by regulating working air pressure
- Higher air pressure results in greater gripping force
- Select appropriate gripping force based on workpiece weight and material
-
Stroke adjustment
- Choose appropriate stroke length as needed
- Ensure workpiece is stably clamped throughout the entire stroke range
Maintenance
-
Daily inspection
- Check for piping leaks
- Confirm smooth operation of the gripper
- Inspect fingers and fixtures for wear or damage
-
Regular maintenance
- Every 3 months:
- Clean the exterior of the gripper
- Check for loose mounting screws
- Inspect wear on fingers and fixtures
- Every 6 months:
- Replace grease
- Check the working status of magnetic switches
- Perform comprehensive functional testing
- Every 3 months:
-
Lubrication
- Use recommended lubricating oil or grease
- Avoid over-lubrication to prevent workpiece contamination or precision issues
Our Commitments & Core Advantages
1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.
2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.
3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.
We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.