Products
0102030405
WENK Pneumatic MXQ Series Pneumatic Slide Table
Product Detail
| Bore | 6 | 8 | 12 | 16 | 20 | 25 |
| Port Size | M5x0.8 | Rc1/8 | ||||
| Actuation Method | Double-Acting | |||||
| Operating Pressure | 0.15~0.7Mpa | |||||
| Ambient Temperature | -10℃~60℃ | |||||
| Operating Piston Speed | 50~500mm/s | |||||
| Material | Aluminum Alloy | |||||
MXQ Pneumatic Slide Table User Manual
1. Product Introduction
The MXQ series pneumatic slide table is a high-precision linear motion device designed specifically for automated applications requiring exceptional rigidity and accuracy. Featuring a hardened stainless steel recirculating linear guide system, it provides excellent parallelism and perpendicularity with repeatable positioning accuracy of ±0.05mm.
Product Features
- Compact design, saving installation space
- Hardened stainless steel recirculating linear guide for high rigidity and precision
- Double-acting design with bidirectional force output
- Integrated buffer device for smooth operation and low noise
- Multi-directional piping options for flexible installation
- Proximity switch mountable for precise position detection
- Optional end lock feature to prevent dropping in vertical applications
- Multiple bore sizes and strokes available to meet different application requirements
2. Technical Parameters
Basic Parameters
- Action type: Double-acting
- Operating medium: Compressed air (filtered to 40μm or finer)
- Operating pressure range: 0.15-0.7MPa
- Pressure resistance: 1.05MPa
- Ambient and fluid temperature: -10~60°C (non-freezing)
- Piston speed: 50~500mm/s (with buffer)
- Lubrication method: Non-lube
Specifications
- Bore size: 6, 8, 12, 16, 20, 25mm
- Stroke: 10, 20, 30, 40, 50, 75, 100, 125, 150mm
- Maximum stroke for 6mm bore: 50mm
- Maximum stroke for 8mm bore: 75mm
- Maximum stroke for 12mm and above: 150mm
- Connection size: M5×0.8
- Repeat positioning accuracy: ±0.05mm
3. Installation Steps
Pre-installation Preparation
- Confirm that the slide table model matches the installation environment
- Check if the slide table appearance is intact and undamaged
- Prepare necessary installation tools and accessories
- Ensure the installation surface is flat and clean
Installation Process
- Select appropriate mounting accessories based on the installation method
- Fix the slide table in the installation position, ensuring the slide movement direction is aligned with the load movement direction
- Connect the air supply pipeline, choosing the convenient piping direction from multiple options
- Install the magnetic switch (if any) and adjust to the appropriate position
- If installing the end lock device, ensure proper compatibility with the slide table
- Check that all connections are secure and without looseness
Installation Precautions
- Avoid excessive radial load and moment on the slide table
- Ensure coaxiality between the slide table and the load during installation
- Reserve sufficient buffer space to avoid collision
- Ensure correct pipeline connection without leakage
- Always use the end lock function for vertical installations
- Maintain appropriate spacing when installing multiple slide tables side by side
4. Operation Guide
Pre-operation Check
- Confirm that the air supply pressure is within the specified range
- Check that all connections are secure
- Ensure the working environment is clean with no impurities entering the slide table
- If using the end lock function, confirm its proper operation
Operation Procedure
- Slowly open the air supply valve to make the slide table move slowly
- Observe if the slide table operates smoothly without abnormal noise
- Test the working status of the magnetic switch (if any)
- Test the end lock function (if any) to ensure reliable locking in case of pressure loss
- Adjust the working pressure and flow as needed
Operation Precautions
- Avoid using beyond the rated pressure
- Avoid long-term high-speed operation of the slide table without lubrication
- Do not strike the slide table body and piston rod
- Regularly check the slide table operation status and stop for inspection if abnormalities are found
- Avoid adjusting or disassembling components while the slide table is in operation
- Always activate the end lock function for vertical applications
5. Maintenance
Daily Maintenance
- Keep the slide table exterior clean
- Check if the air supply pressure is stable
- Check for leaks at connection points
- Listen to the operating sound to determine if it is normal
Regular Maintenance
-
Weekly inspection:
- Slide table operation status
- Fastening condition of connection parts
- Magnetic switch working status
- Reliability of end lock function (if any)
-
Monthly inspection:
- Piston rod and guide rail surface condition
- Buffering effect
- Seal condition
-
Quarterly inspection:
- Internal condition of the slide table
- Replace worn seals
- Comprehensive slide table cleaning
Maintenance Precautions
- Use recommended lubricants
- Avoid using corrosive cleaning agents
- Ensure the air supply is turned off during maintenance
- Pay attention to model matching when replacing seals
- Use a clean soft cloth when cleaning the guide rail to avoid scratching the surface
- Regularly check the reliability of the end lock device
6. Troubleshooting
-
Slide table does not operate
- Possible causes:
- Insufficient air supply pressure
- Solenoid valve failure
- Airway blockage
- Damaged seals
- End lock not released (if equipped)
- Solutions:
- Check air supply pressure and adjust to the specified range
- Check solenoid valve working status, replace if necessary
- Clean the airway to ensure smooth flow
- Inspect seals and replace if necessary
- Check the end lock device to ensure it is properly released
- Possible causes:
-
Slide table moves slowly or weakly
- Possible causes:
- Insufficient air supply pressure
- Insufficient flow
- Worn piston or piston rod seals
- Insufficient lubrication or contamination of guide rail
- Solutions:
- Increase air supply pressure
- Increase pipe diameter or reduce pipe length
- Replace seals
- Clean the guide rail and add appropriate lubricant
- Possible causes:
-
Slide table operates unsteadily or with abnormal noise
- Possible causes:
- Improper adjustment of buffer device
- Insufficient lubrication
- Contaminated or damaged guide rail
- Excessive load or improper installation
- Solutions:
- Adjust the buffer device
- Increase lubrication
- Clean or replace the guide rail
- Check load and installation conditions, reinstall if necessary
- Possible causes:
-
Air leakage
- Possible causes:
- Worn or damaged seals
- Loose connection parts
- Damaged cylinder barrel or piston rod
- Solutions:
- Replace seals
- Tighten connection parts
- Inspect cylinder barrel and piston rod, replace if necessary
- Possible causes:
-
Magnetic switch does not work
- Possible causes:
- Improper switch installation position
- Switch failure
- Insufficient magnet strength
- Solutions:
- Adjust switch position
- Check switch circuit, replace if necessary
- Contact supplier to check magnet strength
- Possible causes:
-
End lock function failure (if equipped)
- Possible causes:
- Insufficient end lock air pressure
- Damaged end lock mechanism
- Mechanical jamming
- Solutions:
- Check if the end lock air pressure is normal
- Inspect the end lock mechanism, replace if necessary
- Clean the end lock mechanism to eliminate jamming
- Possible causes:
Our Commitments & Core Advantages
1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.
2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.
3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.
We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.