Products
0102030405
WENK Pneumatic PA Series Soft Nylon Pipe
Product Detail
| Model | PA4x2.5 | PA6x4 | PA8x5 | PA10x6.5 | PA12x8 | PA10x8 | PA8x6.5 | PA12x10 | PA14x10 | PA16x12 |
| Working Media | Air. Water, Noncorrosive Oil | |||||||||
| Max.Working Pressure(kgf/cm²) | 9 | 8 | 9 | 8 | 8 | 4 | 5 | 4 | 6 | 5 |
| Ambient Temperature | -20℃~+60℃ | |||||||||
| Tube O.D. | 4 | 6 | 8 | 10 | 12 | 10 | 8 | 12 | 14 | 16 |
| Tube I.D. | 2.5 | 4 | 5 | 6.5 | 8 | 8 | 6.5 | 10 | 10 | 12 |
| Min.Bending Radius(m) | 200 | 200 | 100 | 100 | 100 | 100 | 100 | 100 | 50 | 50 |
| Standard Length | 10 | 15 | 20 | 25 | 37 | 35 | 20 | 37 | 56 | 60 |
| Broken Pressure(kgf/cm²) | 35 | 30 | 35 | 30 | 30 | 15 | 20 | 15 | 25 | 20 |
PA Series Nylon Hose - User Guide
Product Introduction
The PA Series Nylon Hose by WENK Pneumatic is a high-performance pneumatic tubing solution manufactured from premium nylon materials (PA6, PA11, PA12). It offers exceptional flexibility, durability, and chemical stability, making it widely applicable in compressed air systems, fluid transfer, and pneumatic control in industrial settings.
Key Features
-
Excellent Chemical Stability: Resistant to oils, greases, most solvents, and petroleum products
-
Wide Temperature Range: Operating temperature from -40°C to 100°C, suitable for various working environments
-
High Strength and Durability: Features high tensile strength and excellent wear resistance for long service life
-
Good Flexibility: Maintains flexibility even in low-temperature environments with small bending radius
-
Smooth Inner Wall: Ensures efficient fluid flow with minimal pressure drop
-
Multiple Specifications: Available in various sizes and configurations to meet different application requirements
Operating Instructions
-
Preparation
- Select the appropriate PA nylon hose size based on application requirements
- Prepare necessary installation tools and fitting accessories
- Check that the hose and fittings are in good condition without damage
-
Cutting the Hose
- Use a dedicated pipe cutting tool or sharp knife to cut the hose
- Ensure the cut is clean and perpendicular without burrs or deformation
- The cutting length should consider the allowance required for system installation
-
Installing Fittings
- Choose the correct installation method based on fitting type (push-in or threaded)
- For push-in fittings, insert the hose into the fitting sleeve up to the marked position
- For threaded fittings, ensure tight thread connection, using appropriate sealing material if necessary
-
System Connection
- Connect the hose with installed fittings to the pneumatic system
- Ensure all connection points are secure and reliable without leakage
- After system connection is complete, perform pressure testing to check for leaks
-
System Commissioning
- Gradually increase system pressure while observing the connection between hose and fittings
- After confirming no leakage, the system can be put into normal use
Preparation
- Select the appropriate PA nylon hose size based on application requirements
- Prepare necessary installation tools and fitting accessories
- Check that the hose and fittings are in good condition without damage
Cutting the Hose
- Use a dedicated pipe cutting tool or sharp knife to cut the hose
- Ensure the cut is clean and perpendicular without burrs or deformation
- The cutting length should consider the allowance required for system installation
Installing Fittings
- Choose the correct installation method based on fitting type (push-in or threaded)
- For push-in fittings, insert the hose into the fitting sleeve up to the marked position
- For threaded fittings, ensure tight thread connection, using appropriate sealing material if necessary
System Connection
- Connect the hose with installed fittings to the pneumatic system
- Ensure all connection points are secure and reliable without leakage
- After system connection is complete, perform pressure testing to check for leaks
System Commissioning
- Gradually increase system pressure while observing the connection between hose and fittings
- After confirming no leakage, the system can be put into normal use
Precautions
-
Working Pressure: Do not exceed the rated working pressure of the hose
-
Temperature Limitations: Avoid using in environments exceeding the specified temperature range
-
Avoid Over-bending: Pay attention to the minimum bending radius of the hose during installation, avoid excessive bending or twisting
-
Chemical Compatibility: Ensure the transfer medium is compatible with nylon material, avoid contact with strong corrosive substances
-
Prevent Mechanical Damage: Protect the hose from scratches by sharp objects or compression by heavy objects
-
Static Protection: In environments where static electricity may be generated, take appropriate anti-static measures
Maintenance
-
Regular Inspection: Regularly check the hose surface for signs of wear, aging, or damage
-
Cleaning: Keep the hose surface clean, avoid accumulation of oil and dust
-
Check Connections: Regularly check if fittings are securely connected and if there are any leakage phenomena
-
Avoid Direct Sunlight: When storing for a long time, avoid direct sunlight and high-temperature environments
-
Proper Storage: Avoid twisting, folding, or heavy pressure during storage, keep in a ventilated and dry place
Troubleshooting
-
Leakage: Check if fittings are loose or if seals are damaged, reconnect or replace seals if necessary
-
Hose Aging: If the hose surface shows cracks, hardening, or discoloration, replace it promptly
-
Pressure Loss: Check if the hose is flattened or blocked, clean or replace the hose if necessary
-
Loose Fittings: Regularly check and tighten all fitting connections
Our Commitments & Core Advantages
1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.
2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.
3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.
We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.
