Products
0102030405
WENK Pneumatic S-AS Push-to-Lock Elbow Type Speed Control Valve
Product Detail
Working Media |
Cleaned Air |
Working Pressure |
0.1~1Mpa |
Proof Pressure |
1.5Mpa |
Working Temperature Range |
0℃~60℃ |
Body Material |
Plastic |
WENK Pneumatic S-AS Push-Lock Elbow Speed Control Valve User Guide
1. Product Introduction
The S-AS Push-Lock Elbow Speed Control Valve is a high-precision pneumatic flow control component developed by WENK Pneumatic, specifically designed for cylinder speed regulation in industrial automation systems.
Main Features:
- Push-lock design allows flow setting and locking without tools
- Elbow structure design saves installation space, suitable for compact environments
- High-quality brass valve body (with electrolytic nickel plating) and PBT engineering plastic knob
- Compatible with various tube materials: nylon, soft nylon, polyurethane, etc.
- Operating temperature range: 0°C to 60°C
- Operating pressure range: 0.1 to 1.0 MPa
2. Working Principle
The S-AS Speed Control Valve regulates cylinder operating speed by adjusting the size of the gas flow cross-section. Its internal structure includes:
- Valve Body: The main part connecting the tube and cylinder
- Throttle Column: Adjusts its position through the knob, changing the gas flow cross-section
- Check Valve: Ensures one-way gas flow, enabling independent control of cylinder extension and retraction speeds
- Push-Lock Mechanism: Fixes the throttle column position to prevent setting loosening
When the knob is rotated, the throttle column moves up and down, changing the cross-sectional area through which gas passes, thereby controlling gas flow and ultimately adjusting the cylinder's operating speed. The push-lock mechanism ensures that the set flow value remains stable in vibrating environments.
3. Installation Guide
Preparation Before Installation:
- Confirm that the product model matches the application requirements
- Check if the product is damaged
- Prepare necessary tools and tubing
Installation Steps:
-
Tube Preparation:
- Ensure the cut is perpendicular and smooth when cutting the tube
- Remove burrs from the tube port
- Measure the required tube length, leaving appropriate allowance
-
Connecting the Tube:
- Press the release collar
- Insert the tube into the fitting until it can no longer be pushed forward
- Release the collar to ensure the tube is firmly clamped
-
Thread Connection:
- Apply appropriate sealant or use Teflon tape on the threaded part
- Use suitable tools to connect the valve to the cylinder or other pneumatic components
- Be careful not to overtighten to avoid damaging the threads
-
Installation Direction:
- The arrow on the valve body indicates the gas flow direction
- Ensure the installation direction is consistent with the actual air flow direction
- The elbow design allows 360° rotation, which can be adjusted according to space requirements
Tube Preparation:
- Ensure the cut is perpendicular and smooth when cutting the tube
- Remove burrs from the tube port
- Measure the required tube length, leaving appropriate allowance
Connecting the Tube:
- Press the release collar
- Insert the tube into the fitting until it can no longer be pushed forward
- Release the collar to ensure the tube is firmly clamped
Thread Connection:
- Apply appropriate sealant or use Teflon tape on the threaded part
- Use suitable tools to connect the valve to the cylinder or other pneumatic components
- Be careful not to overtighten to avoid damaging the threads
Installation Direction:
- The arrow on the valve body indicates the gas flow direction
- Ensure the installation direction is consistent with the actual air flow direction
- The elbow design allows 360° rotation, which can be adjusted according to space requirements
4. Usage Instructions
Speed Adjustment:
-
Unlock: Pull the knob upward to release the locked state
-
Adjust:
- Rotate the knob clockwise: reduce flow, decrease cylinder speed
- Rotate the knob counterclockwise: increase flow, increase cylinder speed
-
Lock: After adjustment, press the knob downward until a "click" sound is heard to confirm locking
- Rotate the knob clockwise: reduce flow, decrease cylinder speed
- Rotate the knob counterclockwise: increase flow, increase cylinder speed
Usage Recommendations:
- For initial adjustment, it is recommended to start from the minimum flow and gradually increase to the required speed
- Avoid removing the tube under system pressure to prevent accidental ejection
- Regularly check connection parts for leaks
- Adjust the maintenance cycle appropriately according to environmental conditions
Precautions:
- Do not exceed the maximum working pressure and temperature range
- Avoid installing the valve in direct sunlight or high-temperature environments
- Do not use compressed air containing corrosive substances
- Regularly drain condensate from the system
5. Troubleshooting
Common Problems and Solutions:
-
Cylinder Speed Cannot Be Adjusted
- Check if unlocked: Confirm the knob has been fully pulled upward
- Check if the throttle hole is blocked: Clean the throttle hole
- Check if the supply pressure is stable: Ensure the pressure is within the working range
-
Flow Setting Changes Automatically
- Check the locking mechanism: Confirm the knob has been fully pressed and locked
- Check if the working environment vibration is too large: Add vibration reduction measures if necessary
- Check if there is external force collision: Readjust and lock
-
Leakage Problems
- Check tube connection: Ensure the tube is fully inserted into the fitting
- Check thread connection: Reapply sealant and tighten appropriately
- Check if the seal is damaged: Replace the seal if necessary
-
Insensitive Adjustment
- Check if there are impurities in the throttle hole: Clean the throttle hole
- Check if the gas is clean: Install a filter
- Check if the valve interior is worn: Replace the valve if necessary
Cylinder Speed Cannot Be Adjusted
- Check if unlocked: Confirm the knob has been fully pulled upward
- Check if the throttle hole is blocked: Clean the throttle hole
- Check if the supply pressure is stable: Ensure the pressure is within the working range
Flow Setting Changes Automatically
- Check the locking mechanism: Confirm the knob has been fully pressed and locked
- Check if the working environment vibration is too large: Add vibration reduction measures if necessary
- Check if there is external force collision: Readjust and lock
Leakage Problems
- Check tube connection: Ensure the tube is fully inserted into the fitting
- Check thread connection: Reapply sealant and tighten appropriately
- Check if the seal is damaged: Replace the seal if necessary
Insensitive Adjustment
- Check if there are impurities in the throttle hole: Clean the throttle hole
- Check if the gas is clean: Install a filter
- Check if the valve interior is worn: Replace the valve if necessary
Our Commitments & Core Advantages
1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.
2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.
3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.
We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.
