Products
0102030405
WENK Pneumatic SCL Series Barbed Elbow
Product Detail
Operating Medium |
Clean Air |
Working Pressure |
0.1~1Mpa |
Proof Pressure |
1Mpa |
Working Temperature Range |
0℃~80℃ |
Body Material |
Brass |
SCL Series Barb Elbow User Guide
Product Introduction
The SCL Series Barb Elbow is a high-quality 90-degree pneumatic connection component manufactured by WENK Pneumatic. Made from premium brass material, it offers excellent corrosion resistance and durability. The fitting features a barbed end for hose connection and a male threaded end for connecting to other pneumatic components. The 90-degree angled design makes it particularly suitable for changing air flow direction in limited spaces.
Installation Instructions
-
Preparation
- Ensure the working environment is clean, free of dust and impurities
- Check the hose for damage and ensure its inner diameter matches the fitting specifications
- Prepare necessary tools: pipe wrench, spanner, etc.
-
Installation Steps
- Clean the fitting surface and hose inner wall with a clean cloth
- Apply a small amount of lubricating oil to the hose inner wall (optional) for easier insertion
- Push the hose firmly onto the barbed end until it reaches the base of the barb
- Use a pipe wrench or spanner to connect the male threaded end to the corresponding component
- Tighten with appropriate torque, avoiding excessive force that may damage the threads
- Ensure the elbow direction matches the air flow design requirements
-
Installation Notes
- Ensure the hose is fully inserted onto the barbed portion without gaps
- For high-pressure systems, it is recommended to use hose clamps to secure the hose connection
- Avoid subjecting the fitting to severe impact or twisting
- Pay attention to maintaining the correct elbow direction during installation
Preparation
- Ensure the working environment is clean, free of dust and impurities
- Check the hose for damage and ensure its inner diameter matches the fitting specifications
- Prepare necessary tools: pipe wrench, spanner, etc.
Installation Steps
- Clean the fitting surface and hose inner wall with a clean cloth
- Apply a small amount of lubricating oil to the hose inner wall (optional) for easier insertion
- Push the hose firmly onto the barbed end until it reaches the base of the barb
- Use a pipe wrench or spanner to connect the male threaded end to the corresponding component
- Tighten with appropriate torque, avoiding excessive force that may damage the threads
- Ensure the elbow direction matches the air flow design requirements
Installation Notes
- Ensure the hose is fully inserted onto the barbed portion without gaps
- For high-pressure systems, it is recommended to use hose clamps to secure the hose connection
- Avoid subjecting the fitting to severe impact or twisting
- Pay attention to maintaining the correct elbow direction during installation
Usage and Maintenance
-
Daily Use
- Regularly check if the connection is secure and free from leaks
- Monitor system pressure for stability
- Avoid exposing the fitting to extreme temperature environments for extended periods
-
Maintenance
- Regularly clean the fitting surface to remove dust and oil
- Check the threaded portion for wear or corrosion
- Replace seals or the entire fitting promptly if leaks are detected
Daily Use
- Regularly check if the connection is secure and free from leaks
- Monitor system pressure for stability
- Avoid exposing the fitting to extreme temperature environments for extended periods
Maintenance
- Regularly clean the fitting surface to remove dust and oil
- Check the threaded portion for wear or corrosion
- Replace seals or the entire fitting promptly if leaks are detected
Troubleshooting
-
Leakage Issues
- Check if the hose is fully inserted onto the barbed portion
- Confirm if the threaded connection is tightened
- Inspect if the seals are damaged, replace if necessary
-
Loose Connection
- Check if the hose is aged or damaged
- Confirm if the fitting specifications match the hose
- Consider using hose clamps to reinforce the connection
-
Poor Air Flow
- Check if there is any foreign object blocking the inside of the fitting
- Confirm if the system pressure is normal
- Check if the hose is flattened or twisted
Leakage Issues
- Check if the hose is fully inserted onto the barbed portion
- Confirm if the threaded connection is tightened
- Inspect if the seals are damaged, replace if necessary
Loose Connection
- Check if the hose is aged or damaged
- Confirm if the fitting specifications match the hose
- Consider using hose clamps to reinforce the connection
Poor Air Flow
- Check if there is any foreign object blocking the inside of the fitting
- Confirm if the system pressure is normal
- Check if the hose is flattened or twisted
Safety Precautions
- Please read this guide carefully before installation and use
- Ensure the system pressure does not exceed the maximum working pressure of the fitting
- When repairing or replacing the fitting, please first turn off the air source and release system pressure
- Avoid contact of the fitting with corrosive substances
- If the fitting is found to be damaged or abnormal, please stop using it immediately and replace it
Our Commitments & Core Advantages
1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.
2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.
3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.
We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.