Products
0102030405
WENK Pneumatic SL Series Stainless Steel Elbow Flow Control Valve
Product Detail
Working Media |
Cleaned Air |
Working Pressure |
0.1~3Mpa |
Proof Pressure |
3Mpa |
Working Temperature Range |
-30℃~200℃ |
Applicable Pipe |
PU tube |
Body Material |
Stainless Steel |
SL Series Stainless Steel Elbow Flow Control Valve User Guide
Product Introduction
The SL Series Stainless Steel Elbow Flow Control Valve from WENK Pneumatic is a high-quality stainless steel pneumatic flow control component designed specifically for pneumatic systems requiring precise air flow regulation. This product features a 90-degree elbow structure with a male thread on one end, a push-in port on the other, and an integrated flow control knob, enabling both right-angle connection and precise air flow adjustment in pneumatic pipelines.
Product Features
- Constructed from stainless steel for excellent corrosion and high-temperature resistance
- 90-degree elbow design, suitable for installation in space-constrained environments
- Male thread on one end for connecting to female threaded interfaces
- Push-in port on the other end for connecting PU tubes
- Integrated flow control knob for precise air flow adjustment
- Available in multiple sizes (4mm, 6mm, 8mm, 10mm, 12mm)
- Thread specifications include G1/8, G1/4, G3/8, G1/2
- Suitable for compressed air systems
Installation Steps
-
Preparation
- Confirm that the SL Series Stainless Steel Elbow Flow Control Valve size matches the tube size and female threaded interface
- Prepare the required size of PU tube and appropriate tools
- Ensure the work area is clean and free of debris
-
Installation Process
- Wrap an appropriate amount of Teflon tape around the male threaded fitting, being careful not to block the air passage
- Thread the male fitting into the female port, using a suitable wrench to tighten, being careful not to overtighten
- Cut the end of the PU tube straight, ensuring a perpendicular cut
- Push the PU tube into the push-in port; a "click" sound indicates proper installation
- To disassemble the tube, press the release sleeve on the push-in port and pull out the tube
-
Flow Rate Adjustment
- Rotate the flow control knob clockwise to decrease air flow rate
- Rotate the flow control knob counterclockwise to increase air flow rate
- Adjust the flow rate to the appropriate level according to system requirements
-
Installation Check
- Check for air leakage at the threaded connection
- Gently pull the tube to confirm a secure connection
- Adjust the flow control knob to check if the flow adjustment function is working properly
- Ensure the entire connection system is secure and reliable
Preparation
- Confirm that the SL Series Stainless Steel Elbow Flow Control Valve size matches the tube size and female threaded interface
- Prepare the required size of PU tube and appropriate tools
- Ensure the work area is clean and free of debris
Installation Process
- Wrap an appropriate amount of Teflon tape around the male threaded fitting, being careful not to block the air passage
- Thread the male fitting into the female port, using a suitable wrench to tighten, being careful not to overtighten
- Cut the end of the PU tube straight, ensuring a perpendicular cut
- Push the PU tube into the push-in port; a "click" sound indicates proper installation
- To disassemble the tube, press the release sleeve on the push-in port and pull out the tube
Flow Rate Adjustment
- Rotate the flow control knob clockwise to decrease air flow rate
- Rotate the flow control knob counterclockwise to increase air flow rate
- Adjust the flow rate to the appropriate level according to system requirements
Installation Check
- Check for air leakage at the threaded connection
- Gently pull the tube to confirm a secure connection
- Adjust the flow control knob to check if the flow adjustment function is working properly
- Ensure the entire connection system is secure and reliable
Maintenance
- Regularly inspect the connector and tube connections to ensure no air leakage
- Keep the connector clean to prevent dust and debris from entering
- Periodically clean the flow control knob to ensure smooth adjustment
- Replace the connector promptly if any damage or aging is detected
- Avoid excessive bending or stretching of the connected tubes
Troubleshooting
-
Tube cannot be inserted: Check if the tube is damaged or deformed; confirm the tube size matches the connector
-
Air leakage at connection: Verify that the tube is fully inserted; check if the threaded connection is properly tightened
-
Flow cannot be adjusted: Check if the flow control knob is damaged; confirm if the knob is stuck due to foreign objects
-
Insufficient flow: Check for tube blockage; confirm if the connector size is suitable for system requirements
Our Commitments & Core Advantages
1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.
2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.
3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.
We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.
