Products
0102030405
WENK Pneumatic Solid Copper SL Series-Speed Control Valve
Product Detail
Working Media |
Cleaned Air |
Working Pressure |
0.1~1.2Mpa |
Proof Pressure |
1.2Mpa |
Working Temperature Range |
-20℃~180℃ |
Applicable Pipe |
PU tube |
Body Material |
Solid Copper |
SL Series Speed Control Valve User Guide
Product Introduction
The SL Series Speed Control Valve from WENK Pneumatic is a high-quality solid copper pneumatic flow control device designed specifically for pneumatic systems requiring precise control of air flow speed. This product features a male thread on one end and a push-in port on the other, capable of connecting PU tubes and precisely controlling air flow speed through an adjustment knob.
Product Features
- Constructed from solid copper for excellent corrosion and high-temperature resistance
- Integrated adjustment knob for precise control of air flow speed
- Male thread on one end for connecting to threaded interfaces
- Push-in port on the other end for connecting PU tubes
- Available in multiple sizes (4mm, 6mm, 8mm, 10mm, 12mm)
- Thread specifications include G1/8, G1/4, G3/8, G1/2
- Suitable for compressed air systems
Installation Steps
-
Preparation
- Confirm that the SL Series Speed Control Valve size matches the tube size and threaded interface
- Prepare the required size of PU tube and appropriate tools
- Ensure the work area is clean and free of debris
-
Installation Process
- Wrap an appropriate amount of Teflon tape around the threaded end, being careful not to block the air passage
- Use a suitable wrench to tighten the threaded end into the threaded interface, being careful not to overtighten
- Cut the end of the PU tube straight, ensuring a perpendicular cut
- Push the PU tube into the push-in port; a "click" sound indicates proper installation
- To disassemble the tube, press the release sleeve on the push-in port and pull out the tube
-
Flow Rate Adjustment
- Turn the adjustment knob clockwise to decrease flow rate
- Turn the adjustment knob counterclockwise to increase flow rate
- Adjust to the appropriate flow rate according to system requirements
-
Installation Check
- Check for air leakage at the threaded connection
- Gently pull the tube to confirm a secure connection
- Test the functionality of the adjustment knob
- Ensure the entire connection system is secure and reliable
Preparation
- Confirm that the SL Series Speed Control Valve size matches the tube size and threaded interface
- Prepare the required size of PU tube and appropriate tools
- Ensure the work area is clean and free of debris
Installation Process
- Wrap an appropriate amount of Teflon tape around the threaded end, being careful not to block the air passage
- Use a suitable wrench to tighten the threaded end into the threaded interface, being careful not to overtighten
- Cut the end of the PU tube straight, ensuring a perpendicular cut
- Push the PU tube into the push-in port; a "click" sound indicates proper installation
- To disassemble the tube, press the release sleeve on the push-in port and pull out the tube
Flow Rate Adjustment
- Turn the adjustment knob clockwise to decrease flow rate
- Turn the adjustment knob counterclockwise to increase flow rate
- Adjust to the appropriate flow rate according to system requirements
Installation Check
- Check for air leakage at the threaded connection
- Gently pull the tube to confirm a secure connection
- Test the functionality of the adjustment knob
- Ensure the entire connection system is secure and reliable
Maintenance
- Regularly inspect the connector and tube connections to ensure no air leakage
- Keep the speed control valve clean to prevent dust and debris from entering
- Periodically clean the adjustment knob to ensure proper adjustment functionality
- Replace the speed control valve promptly if any damage or aging is detected
- Avoid excessive bending or stretching of the connected tubes
Troubleshooting
-
Tube cannot be inserted: Check if the tube is damaged or deformed; confirm the tube size matches the connector
-
Air leakage at connection: Verify that the tube is fully inserted; check if the threaded connection is properly tightened
-
Adjustment not working: Check if the adjustment knob is damaged; confirm if the internal valve core is blocked
-
Insufficient flow: Check for tube blockage; confirm if the speed control valve size is suitable for system requirements
Our Commitments & Core Advantages
1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.
2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.
3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.
We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.
