Products
0102030405
WENK Pneumatic US Series Solenoid Water Valve
Product Detail
Working Media |
Air,Water,Steam |
Working Pressure |
0.1~1.5Mpa |
Proof Pressure |
1.5Mpa |
Working Temperature Range |
-5℃~185℃ |
Body Material |
Brass/Stainless Steel |
US Solenoid Water Valve User Guide
1. Product Introduction
The US Solenoid Water Valve is a high-performance electromagnetic control valve developed by WENK Pneumatic, designed specifically for liquid flow control applications. Featuring a durable brass body with a black solenoid coil and red wire leads, this product ensures reliable performance in various application environments. The US Solenoid Water Valve is used to control the on/off flow of water and other compatible liquids, providing an ideal automated flow management solution for industrial, commercial, and residential water systems.
Main features:
- Durable brass body design
- Reliable black solenoid coil
- Red wires for easy identification
- Compact structural design
- Suitable for various liquid control systems
2. Installation Instructions
2.1 Pre-installation Preparation
- Ensure the installation environment meets the product working conditions
- Check that the product packaging is intact and undamaged
- Prepare necessary installation tools and accessories
- Confirm that the power supply voltage matches the solenoid water valve rated voltage
- Confirm the liquid flow direction, the valve body is marked with corresponding flow direction indicators
2.2 Installation Steps
- Shut off the power supply and liquid source to ensure safety during installation
- Install the valve body in the fluid system according to the liquid flow direction
- Use appropriate tools to connect the input port to the liquid source
- Connect the output port to the equipment requiring control
- Use sealing tape or sealant to ensure tight connections and prevent leakage
- Connect the power supply line, paying attention to polarity (if applicable)
- Check all connections for firmness
- Test the on/off function of the valve to ensure normal operation
2.3 Installation Notes
- Avoid strong impact to the valve body during installation
- Ensure correct port connections, avoid incorrect installation
- Power connections must comply with electrical safety standards
- Installation environment should avoid high temperature, humidity, and corrosive environments
- Regularly check the tightness of installation connections
3. Usage Methods
3.1 Pre-operation Check
- Confirm that the power supply voltage matches the solenoid water valve rated voltage
- Check that all connections are firm and free from leakage
- Test the on/off function of the solenoid water valve to ensure normal operation
- Confirm that the liquid is clean and free from impurities that may cause blockage
3.2 Basic Operation
- Turn on the power, the solenoid coil is energized, the valve opens, allowing liquid to pass through
- Turn off the power, the solenoid coil is de-energized, the valve closes, stopping liquid flow
- Control the liquid flow by controlling the on/off of the power supply according to system requirements
3.3 Operation Notes
- Avoid frequent switching of the solenoid water valve, which may shorten service life
- Ensure stable power supply voltage, avoid voltage fluctuations
- If abnormal sounds, overheating, or leakage are found, stop using immediately and inspect
- When not in use for a long time, it is recommended to turn off the power supply and liquid source
4. Maintenance
4.1 Daily Maintenance
- Regularly clean the valve body surface to remove dust and oil
- Check if the temperature of the solenoid coil is normal
- Test the on/off performance of the solenoid water valve
- Check the sealing status of connection ports
4.2 Regular Inspection
- Check the sealing status of connection ports monthly
- Inspect the insulation performance of the solenoid coil quarterly
- Check the wear condition of internal seals every six months
- Perform a comprehensive cleaning and maintenance annually
4.3 Maintenance Notes
- Use neutral detergent for cleaning, avoid using corrosive solvents
- Ensure the power supply and liquid source are turned off during maintenance to avoid accidental activation
- If parts need to be replaced, it is recommended to use original accessories
- When the solenoid coil is damaged, it should be replaced as a whole, avoid self-repair
5. Troubleshooting
-
Valve does not operate
- Power not connected: Check power connection
- Coil damaged: Replace solenoid coil
- Internal jamming: Clean internal parts
-
Valve cannot close
- Seal damage: Replace seals
- Foreign matter jamming: Clean internal flow passages
- Coil not fully de-energized: Check control circuit
-
Leakage
- Loose connections: Reconnect and reinforce
- Seal wear: Replace seals
- Valve body damage: Contact supplier for repair or replacement
-
Coil overheating
- Abnormal power supply voltage: Check and adjust power supply voltage
- Coil aging: Replace solenoid coil
- Ambient temperature too high: Improve installation environment
Valve does not operate
- Power not connected: Check power connection
- Coil damaged: Replace solenoid coil
- Internal jamming: Clean internal parts
Valve cannot close
- Seal damage: Replace seals
- Foreign matter jamming: Clean internal flow passages
- Coil not fully de-energized: Check control circuit
Leakage
- Loose connections: Reconnect and reinforce
- Seal wear: Replace seals
- Valve body damage: Contact supplier for repair or replacement
Coil overheating
- Abnormal power supply voltage: Check and adjust power supply voltage
- Coil aging: Replace solenoid coil
- Ambient temperature too high: Improve installation environment
Our Commitments & Core Advantages
1. We are a factory specializing in the production of pneumatic components, with mature manufacturing experience and technology.
2. We manufacture and supply a wide range of series and specifications of air cylinders and pneumatic components, providing you with flexible options.
3. We can undertake the customization business of various pneumatic components according to the specific needs of customers.
We adhere to the service concept of efficiency and thoughtfulness, making you feel comfortable throughout the cooperation process, just as smooth as cooperating with a close friend.